[David Fermani]

Here's some more of his quotes in a discussion on clear coat scratches:

Originally Posted by Old Dupont Guy

All you need is 1200 or 1500 from 3M,,,,,that's it! You don't need all of those 2000-3000 grits. Your waisting time and money.

Originally Posted by Other Member

I have done it both ways. I find that for me it is MUCH easier to buff after I go over it with the 3000 on the da wet. I have buffed right after doing the 1500 dry but I have I think it takes me less time to quickly go over it with the 3000 and then spend less time buffing.

Originally Posted by Old Dupont Guy

Sounds like you need to change your compound then..................

Originally Posted by Old Dupont Guy

Quit sanding so much and change something with your buffing, or the compound you are using.

A good compound should not have a problem with 1500 sand scratch...............Let the compound do the work.