Autopia.org - View Single Post

jshillin · 01-21-08, 01:08

The flex is a RO with forced rotation. It falls in between the PC and Rotary. I have a PC, flex and a Hitachi and will use all 3 machines. The flex will probably see the most use though. Things that need a lot of correction, I'll still use the rotary and I'll probably still apply glazes, sealants, etc with my PC. The PC will also come in handy when I only need to use 4" pads...

You should be fine going either route, but I think that boat might be a lot to tackle without a rotary.

01-21-08, 01:08	#2 (permalink)
jshillin Registered User jshillin is offline Join Date: May 2007 Location: Waynesboro, PA Posts: 921	Re: PC and Makita or Flex??? The flex is a RO with forced rotation. It falls in between the PC and Rotary. I have a PC, flex and a Hitachi and will use all 3 machines. The flex will probably see the most use though. Things that need a lot of correction, I'll still use the rotary and I'll probably still apply glazes, sealants, etc with my PC. The PC will also come in handy when I only need to use 4" pads... You should be fine going either route, but I think that boat might be a lot to tackle without a rotary. __________________ - Jason