Quote:
|
Originally Posted by jshillin You always want more than what you need.... Something might only be torqued to 100 ft/lbs, but a bit of corrosion or thread locker makes that almost impossible to break loose. You can always turn it back a notch or not hammer it when putting fasteners on, you need all of the torque to remove things. |
true but if that are that stuck I usually end up ripping the head off the bolt
I am a large guy and have a 25" breaker bar so it's comming off no matter how
corroded it is
so I stand by my answer to his question that it is enough
to have an electric one and a breaker bar