Autopia.org - View Single Post - My Civic

Civicman86 · 11-30-07, 07:08

I will try to get some pics of the motor soon. The engine bay is so messy I'm almost embarrassed to post them. Maybe I'll clean it up tomorrow and snap some pics.

Alright here is the list of stuff on the car, I am sure I'm going to miss some things so...

Also the car has been designed by myself centered around autocross/roadracing. I went with a turbo that would give me good response and not so much top hp. The car is putting down around 250hp (compared to 111 stock). Looking to get around 350-375 with the built motor.

Engine:

D16Y8 stock bottom end (running 2 years now)
Comp stage 2 cam
Golden Eagle Adjustable Cam Gear
GT28RS Turbo
Lovefab custom turbo manifold
Lovefab custom 3" downpipe (running open downpipe)
Autolab dumptube
Fast-Turbo Oil Feed and Return Lines
DSM 450cc injectors
Blitz BOV
Johnny Racecar front mount intercooler
Hondata Intake Manifold Gasket
Walbro 255hp fuel pump
Blitz Turbo Timer
Apexi AVCR Boost Controller
P28 with Crome for fuel management, tuned by myself

Suspension and Brakes and Wheels:

Koni Yellow Shocks
Ground Control Coilovers with custom spring rate eibach springs
NRG Engine Shock/Damper
ASR Rear Subframe Brace
Civic Type R Rear Sway bar (not currently installed)
OMNI Lower Control Arms
Civic Si Rear disk brake conversion
SSR Comp 15" Wheels
Neuspeed front strut bar brace
No name rear strut bar brace

Other Stuff:

Alpine Headunit
Pioneer Speakers
Sparco Racing Steering Wheel
Civic Type R Shift Knob and Shift Boot
CTR Replica Front Lip
Custom black headlights done by myself
Custom front grille done by myself
99-00 Rear Tail Lights
Tinted windows all the way around, 15 on all windows, 35 on front winshield
I have a set of 13" Gold Lenso Wheels with Slicks
Set of SI wheels with autocross/road race slicks on
Extra d16y8 block that I will be building soon
CP pistons to install on block
Eagle Rods to install on block
JAZ Catch Can to be installed
Custom Water Cooler Adapter to be installed (designed by myself and friend)
JDM Smoked Turn Signal lights (mounted on side fenders, you can see them in the 3rd pic)
Getting CF Hood for X-mas
Spoon Reservoir Socks
OEM sider skirts painted to match car
Front bumper plugs (go in front license plate holes for a smoother look, not pictured)

All parts where installed on the car by myself.

I think that is most of it...

11-30-07, 07:08	#7 (permalink)
Civicman86 Detailer Wannabe Civicman86 is offline Join Date: Nov 2007 Location: Louisville, KY Posts: 196	Re: My Civic - From begining to end.... I will try to get some pics of the motor soon. The engine bay is so messy I'm almost embarrassed to post them. Maybe I'll clean it up tomorrow and snap some pics. Alright here is the list of stuff on the car, I am sure I'm going to miss some things so... Also the car has been designed by myself centered around autocross/roadracing. I went with a turbo that would give me good response and not so much top hp. The car is putting down around 250hp (compared to 111 stock). Looking to get around 350-375 with the built motor. Engine: D16Y8 stock bottom end (running 2 years now) Comp stage 2 cam Golden Eagle Adjustable Cam Gear GT28RS Turbo Lovefab custom turbo manifold Lovefab custom 3" downpipe (running open downpipe) Autolab dumptube Fast-Turbo Oil Feed and Return Lines DSM 450cc injectors Blitz BOV Johnny Racecar front mount intercooler Hondata Intake Manifold Gasket Walbro 255hp fuel pump Blitz Turbo Timer Apexi AVCR Boost Controller P28 with Crome for fuel management, tuned by myself Suspension and Brakes and Wheels: Koni Yellow Shocks Ground Control Coilovers with custom spring rate eibach springs NRG Engine Shock/Damper ASR Rear Subframe Brace Civic Type R Rear Sway bar (not currently installed) OMNI Lower Control Arms Civic Si Rear disk brake conversion SSR Comp 15" Wheels Neuspeed front strut bar brace No name rear strut bar brace Other Stuff: Alpine Headunit Pioneer Speakers Sparco Racing Steering Wheel Civic Type R Shift Knob and Shift Boot CTR Replica Front Lip Custom black headlights done by myself Custom front grille done by myself 99-00 Rear Tail Lights Tinted windows all the way around, 15 on all windows, 35 on front winshield I have a set of 13" Gold Lenso Wheels with Slicks Set of SI wheels with autocross/road race slicks on Extra d16y8 block that I will be building soon CP pistons to install on block Eagle Rods to install on block JAZ Catch Can to be installed Custom Water Cooler Adapter to be installed (designed by myself and friend) JDM Smoked Turn Signal lights (mounted on side fenders, you can see them in the 3rd pic) Getting CF Hood for X-mas Spoon Reservoir Socks OEM sider skirts painted to match car Front bumper plugs (go in front license plate holes for a smoother look, not pictured) All parts where installed on the car by myself. I think that is most of it...