Quote:
|
Originally Posted by blue-sun not sure what some of you guys are doing or how long it takes, but I can do a wash, clay, wash, dry, PC remove swirls, apply sealant, dress tires and clean exhaust, wipe off sealant, apply & buff out QD on a WRX Sedan in under 3 hrs. And that's not even "rushing it".
I can't see the Rotary taking alot of time off of that.
I have been able to do that to a WRX rushing it in 2.5 hrs or so, and with help of a friend or my wife, cut that down to just under 2 hrs.
I have the $30 Chicago Electric Rotarty and I just don't like it. Compared to my PC, it's bulky, heavy and harder to control (with a Meguiars Red Cutting Pad - same pad I've been using with my PC for 3+ yrs now with no similar issues) than my PC.
My $.02 |
On cars that dont need alot of correction(newer) I am right there with you, about an hour on prep,engine, wheeels and wash, I then do the interior and about 2 hours tops to complete the exterior when the inside is done.
Anything that needs correction I use my Makita or for light colored cars, it takes about 20-30 min to one step a silver avg condition 2002 or so vehicle with a rotary, dark cars i use my PC for quick polish or one steps.
The reason you may not like your rotary could be the brand, I hate dewalts and millwalkii
if you were to use a metabo or makita(lighter) you may have a different experience.